Wearing your Freedom Silicon or Freedom Lite bra:

Clean your chest area with mild soap and water. It is important to remove body oil and residue. Dry your skin with a soft towel. Do not use powders, moisturizers,oils, or fragrances on your chest area. Gently remove bra cup out of the tray. Place each bra cup on one side of your breast at a time. Hold the bra cup by the edge and flip it backwards on to your breast. Position the cup so that it rests comfortably and gently smooth the cup firmly onto breast. Repeat on the other breast. Make sure that both sides are equal in height. Connect the middle closure of your bra. Press the bra cup firmly with both hands for a few seconds to secure it.

Suggestions:
For the first few tries, it may be helpful to stand in front of the mirror. To achieve a fuller look, position bra cup slightly higher. It is normal for the lower portion of your breast to be slightly uncovered. This will allow the bra to blend seamlessly with your breast for a more natural look. Too many attempts at repositioning the bra may cause the adhesiven to be less effective.In such occasions, simply clean the bra cups. Let it air dry before re-using them. Flaunt is not designed to replace your everyday bra.

Removing your Freedom Silicon or Freedom Lite Bra:
Detach the middle closure. Remove each bra cup one side at a time. Peel from the top and slowly work your way down. Clean your breasts if there is any adhesive residue.

Removing your Nippies:
Gently peel off Nippies from breast. Clean your breast if there is any adhesive residue.

Important Note:
Always handwash your product after each use to remove any residue. This will help to prolong the lifespan of your product. Do not machine wash or machine dry. Do not use alcohol, detergents, bleach or any other cleaning solutions. Do not use towels, brushes or fingernails to clean the surface. If you need to lift any lint or dirt particles off of the adhesive, carefully remove them with your fingers. Excessive dirt or lint will on the adhesive might reduce its effectiveness. Do not remove the adhesive as it will damage your product.

Cleaning your Freedom Silicon or Freedom Lite Bra:
Detach the middle closure and wash the bra cups individually. Hold one bra cup on the palm of your hand. Gently clean the entire bra cup with a mixture of warm water and a small amount of mild soap. Repeat this process 2 to 3 times and use running tap water to rinse off any soap residue. Shake off excess water and place your bra in its original tray to air dry. Do not use a hair dryer or towel to dry your bra. When your bra is dried, cover the tray with the provided lid. It is important to prevent dust and lint from gathering on the adhesive.

Cleaning your Nippies:
Clean Nippies with mild soap under running tap. Rinse off any soap residue with water. Gently shake off excess water and place Nippies in its tray to air dry. Do not use a hair dryer or towel to dry your Nippies. When your bra is dried, cover the tray with the provided lid. It is important to prevent dust and lint from gathering on the adhesive.